| With 18 X 9.5-8 Tires |
| DIMENSIONS* |
U.S. |
METRIC |
| Tractor back to rear axle |
26.8 in |
681 mm |
| Rear axle to attachment mounting |
19.2 in |
488 mm |
| Mobile height |
53.5 in |
1.36 m |
| Ground clearance |
5.3 in |
135 mm |
| Platform height |
10.7 in |
272 mm |
| Width |
36 in |
914 mm |
| Angle of departure |
25° |
|
| Mass |
968/1010 lb |
439/458 kg |
| OPERATION |
U.S. |
METRIC |
| Ground drive speed, forward |
|
|
| Low |
3.3 mph |
5.3 km/h |
| High |
3.3 mph |
5.3 km/h |
| Ground drive speed, reverse |
|
|
| Low |
3.3 mph |
5.3 km/h |
| High |
3.3 mph |
5.3 km/h |
| POWER PLANT |
U.S. |
METRIC |
| Engine |
Honda IGX440 |
|
| Fuel |
Gasoline |
|
| Cooling medium |
Air |
|
| Number of cylinders |
1 |
|
| Displacement |
26.7 in3 |
438 cm3 |
| Bore |
3.46 in |
88 mm |
| Stroke |
2.84 in |
72.1 mm |
| Manufacturer's power rating |
15 hp |
9.5 kW |
| Rated speed |
3600 rpm |
|
| POWER TRAIN |
| Parking brake: Mechanical, hand operated |
| Service brake: Ground drive speed/direction control brakes machine hydraulically when moved to neutral position |
| TIRES/PRESSURE |
U.S. |
METRIC |
| 18 x 9.5-8, 2-ply, bar lug |
12 psi |
82.7 kPa |
| Tire assembly mass |
22 lb |
9.98 kg |
| Urethane filled 18 x 9.5-8, 2-ply, bar lug |
N/A |
N/A |
| Tire assembly mass |
36 lb |
16.33 kg |
| 18 x 8.5-8, ply, turf |
22 psi |
151.7 kPa |
| Tire assembly mass |
20 lb |
9.07 kg |
| HYDRAULIC SYSTEM |
U.S. |
METRIC |
| Auxiliary: Gear pump |
|
|
| Flow rate |
7.4 gpm |
28 L/min |
| Pressure |
3000 psi |
207 bar |
| Ground drive: Hydrostat |
|
|
| Flow rate |
11.4 gpm |
43.2 L/min |
| Pressure |
1800 psi |
124 bar |
| FLUID CAPACITIES |
U.S. |
METRIC |
| Fuel tank |
10.9 gal |
41.3 L |
| Engine oil, including filter |
1.6 qt |
1.1 L |
| Hydraulic reservoir |
7.7 gal |
29.1 L |
| Total hydraulic system volume |
8.5 gal |
32.2 L |
| BATTERY |
U.S. |
METRIC |
|
|
|
| R150E only |
|
|
| SAE reserve capacity rating |
32 min |
|
| SAE cold crank rating @ 0° F (-18° C) |
200 amps |
|
|
| *Unless otherwise specified, all figures are for standard equipment only. Specifications are called out according to SAE recommended procedures. Due to selected options, delivered equipment may not necessarily match that described. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. |