FM25FLUID MANAGEMENT

With its innovative line of fluid mixing systems, the Ditch Witch organization set the standards for efficiency in the HDD industry. The latest addition to this family is the FM25, a reliable, low-maintenance drilling fluid mixing system that makes short work of the mixing process.

KEY FEATURES

DETAILS

LITERATURE

MANUAL

SPECS

SAFETY

JOB RELATED

Untitled Document

1 2

KEY FEATURES,

FM25

Simple design and multiple configuration options accommodate a variety of setups and make transport easy.
25-hp (18.7 kW) Kubota diesel engine provides the power to support even the largest Ditch Witch HDD systems.

DETAILS,

FM25

REQUEST MORE INFO

Venturi wet hopper has steeper sides that allow fast, thorough fluid mixing.
Choice of one or two hoppers, either a 500-gallon (1893 L) or 1000-gallon (3785 L) tank, and a fuel fill on both sides, allows flexible setup configurations on a trailer or truck.

Optional accessories, including an anti-siphon tank fill and an umbrella kit, enhance the FM25's versatility.

LITERATURE,

FM25

Select your language to view PDF

English

MANUAL,

FM25

SPECIFICATIONS,

FM25

DIMENSIONS (APPROX. OVERALL PACKAGE)	U.S.	METRIC
Length	192 in	4.88 m
Width	102 in	2.59 m
Height
Tank assembly, without fill pipe	72 in	1.83 m
Tank assembly, with fill pipe	78 in	1.98 m
Weight, empty	2700 lb	1230 kg
Weight, total system filled with water	19,700 lb	8960 kg
POWER
Engine: Kubota D1105
Fuel: Diesel
Cooling medium: Water
Cylinders: 3
Displacement	68.3 cu in	1.12 L
Bore	2.99 in	76 mm
Stroke	3.09 in	78 mm
Manufacturer's gross power rating	25 hp	18.7 kW
Rated speed: 3000 rpm
Emissions Compliance	EPA Tier 2	EU Stage IIIa
FLUID CAPACITIES	U.S.	METRIC
Engine oil, including filter	4.2 qt	4 L
Fuel tank	9.2 gal	35 L
FLUID MIXING SYSTEM
Centrifugal pumps: 2
Suction port diameter	3 in	76 mm
Discharge port diameter	3 in	76 mm
Fluid pressure, maximum	50 psi	3.4 bar
Pump discharge rate, maximum, water (each)	300 gpm	1135 L/min
Flow rate to drilling unit, maximum (42 visc)	200 gpm	750 L/min
Drilling fluid tank capacity (each)	500/1000 gal	1893/3785 L
Solids addition rate
With metering plate	30 lb/min	14 kg/min
Without metering plate	75 lb/min	34 kg/min
Mixing hopper capacity (each)	1 cu ft	28 L
Typical tank mixing time: 7-10 minutes


Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not match that shown.

ATTACHMENTS,

FM25

TRAILERS,

FM25

JOB RELATED, FM25

Keeping Your Fleet's Hydraulic Systems Running Properly
If your machine's hydraulic system isn't working, neither are you. Here are some common causes of hydraulic system breakdown and steps you can take to avoid them.